DIY: How to Sponge Paint Your Floors


You should not limit faux painting in your house to merely the walls. Have you thought that the same paint coating would look reasonably good on your floor? This is particularly true if you have a concrete floor – you should consider painting it. It also offers a cost-effective answer to covering your floor; the painting DIY can also be a lot of fun.

Sponge painting your floors is an excellent way to start if you don’t have a unique design in mind. It’s also one of the simplest ways to end up with a map on your floor that makes it look like it’s what you’d intended for it to look like. After all, most of the other kinds of floor paintings involve trying to match a special design type. On the other hand, sponge painting is just a way for you to create a pattern on the floor.

To sponge paint your floor, you will need to prep the floor the same way that you might prepare it for any other kind of coating in your home. First, you should clean the floor with a durable cleaning solution. This is so that you clean up any dirt that might have been scraped into it in the past. This is also an excellent way to get rid of any marks that might have been dropped on the floor from the movables with rubber feet.

If there are any uneven spots still on the floor, you’ll need to sand them down. You don’t need to have an entirely flat floor, but having a neat, level surface to paint on will make your life a lot more peaceful during the actual sponge painting stage itself. Don’t cause yourself any unnecessary sorrow when doing this kind of work.

Sponge painting will need two separate colors of paint. Most people go for two similar shades of the same color. For example, if you are looking for a blue floor, you might put a lighter shade of blue with a darker violet on top of it.

After you have readied the base coat, leave it to dry for a couple of days. Next, put the second coat of paint. Primarily, this painting will serve the same way that it does on your walls. Just be sure that you use the sponge to lift off the next coat of paint in some places, rather than using it to apply that coat of paint – otherwise, you could ruin the result you’re trying to accomplish.

Here are six DIY steps to follow:

  1. Choose 2 or more colors of similar shade.
  2. Remove the furnitures from the room you are planning to paint, and soil the uneven surface.
  3. Clean your floor properly.
  4. Roll the first coat, and leave it to dry for a couple of days.
  5. Apply new layers with Sponge.
  6. Protect it with Varnish. 

Was it worth reading? Let us know.